Slide2Wet and Dry Vacuum Cleaner Training Extension Pipe For convenience in operation, you can connect the suction hose to the extension pipe and attach the nozzle you need to the end of the pipe. Spray/Suction Hose The flexible suction hose has an ergonomic handle with a spray button. The suction hose is attached to the appliance body, and the spray pipe is connected with the fresh water reservoir. The other side of the hose is equipped with a suitable nozzle. Appliance Body The body contains an electric motor and auxiliary components such as the suction turbine, spray pump, and air bleed system. On the top, there's a filter changing display that indicates when the filter bag is full. Plus: •Carrying handle •Accesory holder •Retractable cable •Filter flap release button Container In the bottom part of the appliance, there are tanks for fresh and wastewater. During operation, fresh water enters the system through the spray pipe and gets to the wastewater reservoir through the suction hose. Both tanks are detachable, so it is easy to fill it with clean water and empty the wastewater container. The appliance can also be used without water thanks as an ordinary vacuum cleaner. Wash Nozzle The wash nozzle sprays clean water over the surface to be cleaned. Once the surface to be cleaned. Once the surface is wet, the appliance automatically switches to vacuuming; the suction turbine activates, and dirty water gets to the wastewater reservoir through the vent in the nozzle. Switchable Nozzles for Different Surface Types In addition to the standard nozzles for different types of cleaning: •Wash nozzle for carpets. •Wash hand nozzle for upholstery; e.g, sofas, armchairs, couches, beds etc. •Crevice nozzle for cleaning hard- to-reach places. •Suction brush with soft bristles for gentle cleaning of delicate glossy surfaces. •Scraper for windows. Cleaner Pro-15 Wet & Dry Vacuum Cleaner Training A brief technical manual for salespersons click on the markers to learn more about vacuum cleaner parts.
Thank you for your comment.